CO2 Cylinders & Accessories

Items 1 to 31 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. 2 Output / 2 Way Gas Line	Manifold Splitter with Check Valves

    2 Output / 2 Way Gas Line Manifold Splitter with Check Valves

    Price: AU$23.95

    These gas manifolds are rated to 100psi and include 2 gas line outputs and 2 x 1/4inch ball vales. This unit can be turned into a 3 way manifold by adding a 1/4 inch ball valve (part 7162) as shown in the picture to the left on the 4 way manifold. You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly (part 7087) if you want to be able to easily disconnect/reconnect a gas line. Features: - Made complete from aluminium, brass and stainless so they are durable. - Includes screw holes at the top for easy mounting to your gas board. - Each ball valve has a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg. Learn More
  2. MKIII Multi Gas Regulator CO2, O2, Ar, N2 (0-50psi)

    MKIII Multi Gas Regulator CO2, O2, Ar, N2 (0-50psi)

    Price: AU$59.95

    The new MKIII regulator has all the advantages of the older MKII model but several internal improvements have been made to make the regulator even more reliable.

    NEW IMPROVEMENTS IN SEAT AND SEAT CAP DESIGN
    The most common regulator failure that is seen in the industry is failure with the seat and seat cap assembly (parts 10-17).  The issue is almost always caused by contamination in these parts.  In the past most regulators in Australia come with a single sintered filter on the inlet spigot (nut and stem).  The new Keg King MKIII model gas double filtration and includes a second sintered filter on the underside of the seat cap assembly (part 17)

    NEW IMPROVEMENTS IN SEAL COMPOSITION
    The seat and seat cap assembly has also been re-designed and now takes advantage of ultra-high molecular weight polyethylene (UHMWPE) the new UHMWPE is significantly better in chemical resistance and stability than the Teflon that is normally used in other brand names.

    FULLY ENCAPSULATED SEAT TECHNOLOGY
    The regulators have also been designed so that the whole seat and seat cap assembly (parts 10-17) are manufactured as a fully encapsulated part.  This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent.  This further improves reliability.

    Suitable for CO2, Oxygen, Argon and Nitrogen Our MK III regulator is made with high quality machined brass body and can be used on multiple gasses.

    The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. The Regulator also has a large adjustment knob for easy adjustment.

    This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

    The standard type 30 nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses.

    Other nut and stems can be interchanged:
    Type 10 Nut and Stem : Oxygen, Argon, Helium
    Type 30 Nut and Stem : CO2, CO2/Nitrogen Mixed Gas
    Type 50 Nut and Stem : Nitrogen

    Exploded diagram and parts list

    Service Kit

    Learn More
  3. CO2 Gas Cylinders 2.6kg (full)

    CO2 Gas Cylinders 2.6kg (full)

    Price: AU$189.00

    This 2.6kg cylinder is our most popular CO2 cylinder. It's small enough to take with you camping or to a party, put inside a kegerator or hang in the cylinder bracket included with our Keg Masters but large enough to dispense many kegs. Purchasing your own CO2 cylinder is generally cheaper than renting from a gas supplier for periods longer than 12 months. Features: - Australian Standard Approved - Hold 2.6kg of gas when full - Dimensions 47cm high x 14cm diameter - Comes with included carry handle for easy of transport and protection of valve - Will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 200L or over 10 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 400L or 8 x 50L kegs. Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. Click the "Find Your Local Retailer" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations. This will usually cost about $25 - $35 for this 2.6kg cylinder. To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. Check out the video below to see how to do this. Learn More
  4. CO2 Gas Cylinders 6kg (full)

    CO2 Gas Cylinders 6kg (full)

    Price: AU$219.00

    This 6kg cylinder is ideal if you're carbonating and/or dispensing large amounts of beer or live far away from a filling station. Purchasing your own CO2 cylinder is generally cheaper than renting from a gas supplier for periods longer than 12 months. Features: - Australian Standard Approved - Holds 6.0kg of gas when full - Dimensions 71cm high x 16cm diameter - Comes with included carry handle for easy of transport and protection of valve Note: The 2.6kg cylinder (also available) will fit in Keg Master Series 4 Kegerators without reducing the number of kegs it can hold. Note: In order to ship these larger cylinders they will be received with slightly less than 6kg of CO2. Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 500L or over 25 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 400L or 20 x 50L kegs. Once the cylinder is empty there are many places around Australia where it can be filled or exchanged for a full one. Click the "Find Your Local Retailer" link up the top of the page (or at the bottom of the side menu for mobile) to see a map of these locations. This will usually cost about $50 - $70 for this 6.0kg cylinder. To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. Check out the video below to see how to do this. Learn More
  5. FreedomOne Sodastream Adapter Hose - 36inch

    FreedomOne Sodastream Adapter Hose - 36inch

    Price: AU$89.95

    This handy hose attachment will allow you to connect one of our 2.6kg or 6kg CO2 cylinders to your sodastream machine. This adapter also includes a handy pressure guage so you can see how much pressure is left in yor CO2 cylinder. With the FreedomOne Adapter you can enjoy a seemingly endless supply of soda and a fraction of the cost of your regular CO2 refills. Note: does not include CO2 bottle or soda stream unit. Learn More
  6. FreedomOne Sodastream Adapter Hose - 72inch

    FreedomOne Sodastream Adapter Hose - 72inch

    Price: AU$109.95

    Out of stock

    This handy hose attachment will allow you to connect one of our 2.6kg or 6kg CO2 cylinders to your sodastream machine. This adapter also includes a handy pressure guage so you can see how much pressure is left in yor CO2 cylinder. With the FreedomOne Adapter you can enjoy a seemingly endless supply of soda and a fraction of the cost of your regular CO2 refills. Note: does not include CO2 bottle or soda stream unit. Learn More
  7. Aquarium Regulator CO2 with Magnetic Solenoid Valve

    Aquarium Regulator CO2 with Magnetic Solenoid Valve

    Price: AU$79.95

    This Aquarium Regulator with Bubble Counter and Magnetic Solenoid Valve is great to control the flow of CO2 into your fish tank. With the solenoid valve and bubble ocunter included you calculate the exact flow rate of co2 into your tank. The magnetic solenoid valve is so that you can use an electrical signal to turn on or off the flow of CO2. This is used with a 24hr timer that will turn your lights on and off in the tank at the same time as the solenoid so you only have CO2 going into the tank when you have lights on. Specifications: Compact & sturdy construction. Dual gauge pressure indicators. Industrial-grade Precision Needle Valve. Integrated 220-240V Solenoid (Magnetic) Electrical Valve Compatible with various size of CO2 Cylinders (from 2.6kg, 6kg, and any other Australian standard CO2 cylinder). The thread is made according to AU standard (JIS m22-14), 22mm in diameter. Learn More
  8. 4 Output / 4 Way Gas Line	Manifold Splitter with Check Valves

    4 Output / 4 Way Gas Line Manifold Splitter with Check Valves

    Price: AU$39.95

    These gas manifolds are rated to 100psi and include 4 gas line outputs and 4 x 1/4inch ball vales. This unit can be turned into a 5 way manifold by adding a 1/4 inch ball valve (part 7162) as shown in the picture to the left on the 4 way manifold Multiple gas manifolds can be connected together using our 1/4 inch hex nipple (Part RET3741). This will enable you to make your manifold as large as you like. (shown to the left). You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly (part 7087) if you want to be able to easily disconnect/reconnect a gas line. Features: - Made complete from aluminium, brass and stainless so they are durable. - Includes screw holes at the top for easy mounting to your gas board. - Each ball valve has a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg. Learn More
  9. 6 Output / 6 Way Gas Line	Manifold Splitter with Check Valves

    6 Output / 6 Way Gas Line Manifold Splitter with Check Valves

    Price: AU$64.95

    These gas manifolds are rated to 100psi and include 6 gas line outputs and 6 x 1/4inch ball vales. This unit can be turned into a 7 way manifold by adding a 1/4 inch ball valve (part 7162) as shown in the picture to the left on the 4 way manifold Multiple gas manifolds can be connected together using our 1/4 inch hex nipple (Part RET3741). This will enable you to make your manifold as large as you like. (shown to the left). You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly (part 7087) if you want to be able to easily disconnect/reconnect a gas line. Features: - Made complete from aluminium, brass and stainless so they are durable. - Includes screw holes at the top for easy mounting to your gas board. - Each ball valve has a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg. Learn More
  10. 1/4 Inch Ball Valve with Check Valve

    1/4 Inch Ball Valve with Check Valve

    Price: AU$7.95

    These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Should only be used with gas, not beer. The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing the 1/4 inch plug from the end of the manifold and inserting one of these 1/4 inch ball valves (see image to the left). Please note that due to the check valve mechanism there is about a 2 psi pressure drop over these ball valves. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg. Learn More
  11. Carbonation & Line Cleaning  & Counter Pressure Filler Cap

    Carbonation & Line Cleaning & Counter Pressure Filler Cap

    Price: AU$19.95

    This new model carbonation cap does everything that our old carbonation cap did but this comes with several added features. The post on this unique carbonation cap has been machined to fit BOTH the black/liquid and grey/gas ball lock disconnects. This carbonation cap also includes a barbtail on the underside so you can attach some beer line to act as a dip tube. This allows the carbonation cap to be used in several different ways including: 1. Carbonate 2. Cleaning your beer lines 3. Use it to counter pressure bottle fill PET bottles Learn More
  12. Carbonation Keg Lid with 0.5 Micron Diffusion Stone

    Carbonation Keg Lid with 0.5 Micron Diffusion Stone

    Price: AU$49.95

    The keg lid with built-in carbonation stone!
    The easiest way to carbonate your beer.
    Move the lid from keg to keg to carbonate as needed. This lid allows fast force carbonation with the minimum of effort.

    Features:
    - Stainless Steel 0.5 Micron Diffusion Stone
    - Keg Lid with Stainless Ball Lock Post
    - Silicon Keg Lid seal
    - 60cm of hose

    Instructions for the carbonation keg lid here.

    Learn More
  13. Premium Regulated CO2 Charger

    Premium Regulated CO2 Charger

    Price: AU$49.95

    Out of stock

    Unlike the cheaper charger kits made from plastic this little charger kit is made from machined anodised aluminium. The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget. Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure. Note: The Premium Regulator CO2 Charger does not come with CO2 16g cartridge you will need to purchase these separately. Does not include grey/gas disconnect or Growler and Drafto kit or keg New improved model, this is the silver/chrome one as shown in the first three photos. And if you would like another use for the Premium Regulated CO2 Chrager see the video below Learn More
  14. 16g CO2 Charger Cartridge / Bulb (threaded)

    16g CO2 Charger Cartridge / Bulb (threaded)

    Price: AU$1.95

    Suits both our Keg CO2 charger kit and our Premium Regulated Charger Kit. Learn More
  15. One Way Check Valve (8mm push in type)

    One Way Check Valve (8mm push in type)

    Price: AU$9.95

    Every keg setup should have one. This handly device will ensure you protect your regulator against reversal of flow in your lines. This is a 8mm push in type so that if you are using 8mm OD gas line the line then it will push directly into the fitting without the need for any clamps. Note: the red end is the output Learn More
  16. One Way Check Valve (with brass barbs)

    One Way Check Valve (with brass barbs)

    Price: AU$9.95

    Every keg setup should have one. This handly device will ensure you protect your regulator against reversal of flow in your lines. This one way check valve with brass barbs will suit several different gas lines irrespective of the outside diameter (OD) The diameter of the barbs are 6mm.. These will also push straight into our gas line splitters. Learn More
  17. Gas Line Splitters

    Gas Line Splitters

    Price: AU$9.95

    These gas line splitters are sold as single pieces. By purchasing multiple units you can split your gas line into as many outputs as you like. The fittings just simply push into each other and require no clips, or additional parts. Features: - Easy to use and assemble - Modular so you can keep adding more lines if needs be. - Made from high strength food grade plastic. - Comes with brass barbs. Learn More
  18. Adjustable pressure relief Valve with Guage

    Adjustable pressure relief Valve with Guage

    Price: AU$29.95

    Relieves pressure while filtering from one keg to another or allows you to accurately naturally condition in the keg by setting the desired venting pressure. Adjustable up to 100kPa (15psi). To adjust the pressure you need to wind/unwind the end of the valve. Note: The grey ball lock disconnect is sold separately (part#5267) or you can also use pin lock disconnect (part#5977 Learn More
  19. Low Pressure Gauge 0-80psi

    Low Pressure Gauge 0-80psi

    Price: AU$9.95

    Low Pressure Guage to suit our MKII Regulators 0 - 80psi Learn More
  20. In Line Regulator

    In Line Regulator

    Price: AU$9.95

    This in line regulator is suitable for gas or liquid. The regulator can be adjusted with a normal flat head screw driver. the regulator is constructed of non corrosive acetyl, nitrile, and stainless components. The regulator has two mounting points where you can attach the regulator to the wall. The regulator includes two brass barbs as show in the photo. The barbs are suitable size so you will be able to attach 5 or 6mm ID tubing to the barbs. Alternatively you can use the 1/4inch hose commonly used with water filter housings and attach this directly into the push fit fittings on either side of the regulator. These regulators are idea of reducing your mains water pressure to any pressure from 0-150 psi. The maximum inlet pressure is 150psi. As it shows in the photo we have actually used one to lower the CO2 pressure going into one of our kegs. Learn More
  21. High Pressure Gauge 0 - 3000psi

    High Pressure Gauge 0 - 3000psi

    Price: AU$9.95

    High Pressure Guage to suit our MKII Regulators 0 - 3000psi Learn More
  22. Add-On CO2 Regulator Adapter

    Add-On CO2 Regulator Adapter

    Price: AU$24.95

    Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expansion easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators. Note: does not include regulator or gas bottle Learn More
  23. Sodastream Cylinder Adapter

    Sodastream Cylinder Adapter

    Price: AU$9.95

    Use a Sodastream cylinder to dispense/carbonate your kegs. This is the ideal unit for the low volume user, or someone who does not want to put a lot of capital into purchasing a larger CO2 Cylinder. Soda stream cylinder adapters are also great for small portable keg setups. The perfect addition for a home brew set up just in case you run out of CO2 in your main cylinder at the wrong time. Note: does not include regulator or gas canister Learn More
  24. Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Price: AU$19.95

    These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately (part#6097). This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items (as shown in pictures to the left). Learn More
  25. Regulator Replacement Diaphragm and Seat Assembly

    Regulator Replacement Diaphragm and Seat Assembly

    Price: AU$14.95

    Regulator Replacement Diaphragm and Seat Assembly for Keg King MKIII regulator.

    Please note this is different to the diaphragm and seat assembly for the MKII regulator, if you are in need of the MKII  parts please contact us.

    Learn More
  26. 5 in 1 Faucet Tap Wrench/Spanner

    5 in 1 Faucet Tap Wrench/Spanner

    Price: AU$5.95

    This handy tool is exactly what you need to fit numerous dispensing applications: - The 27mm nut to attach the tap to your font. - The ring collar that tightens the faucet to the tap shank. - The type 30 nut to attach your regulator to your CO2 bottle - The FFL fitting to go onto an MFL connection - A bottle opener Learn More
  27. CO2 Cylinder Valve (with RPV)

    CO2 Cylinder Valve (with RPV)

    Price: AU$19.95

    CO2 Cylinder Valve (with RPV)

    To suit keg king cylinders, should be installed by trained personnel.

    Learn More
  28. MKII Dual Gauge Multi Gas Regulator

    MKII Dual Gauge Multi Gas Regulator

    Price: AU$59.95

    Out of stock

    Suitable for CO2, Oxygen, Argon and Nitrogen Our MK III regulator is made with high quality machined brass body and can be used on multiple gasses. The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. The Regulator also has a large adjustment knob for easy adjustment.

    This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

    The standard type 30 nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses. Other nut and stems can be interchanged:

    Type 10 Nut and Stem : Oxygen, Argon, Helium
    Type 30 Nut and Stem : CO2, CO2/Nitrogen Mixed Gas
    Type 50 Nut and Stem : Nitrogen

    This regulator has now been discontinued and has been replaced by the new MKIII model click here to see that one

    Learn More
  29. Brass 1/4inch MFL x 1/4 NPT (1/4 BSP)
  30. CO2 Cylinder Bracket Holder

    CO2 Cylinder Bracket Holder

    Price: AU$19.95

    Ideal if you want to mount your cylinder to a wall. This cylinder bracket has an adjustable strap to enable use with different size bottles up to a maximum diameter of 170mm Note: not suitable for cylinders over 15kg Learn More
  31. Mini All In One Regulator/Charger with PRV

    Mini All In One Regulator/Charger with PRV

    Price: AU$69.95

    This versatile mini regulator can be used with either a large (2.6kg) CO2 cylinder or the mini 16g CO2 bulbs. They are a high quality regulator with better performance than the mini regulated charger. The regulator comes with two attachments for the outlet of the regulator so it can be threaded onto a MFL disconnect to attach directly to a keg or a barb attachment to attach a 5mm ID gas line making it one of the most versatile CO2 regulators on the market. Includes a low profile output pressure gauge and pressure relief valve, these regulators can be used up to 50psi. Due to the carry handle on the 6kg cylinder these are quite a tight fit so work best with out 2.6kg cylinders if using a Type 30 connection cylinder. Does not include disconnects, CO2 bulbs or cylinder. Learn More

Items 1 to 31 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction