Filtration & Aeration
These 10inch filter systems can use both our 10 inch filter cartridges, either the Washable Reinforced Filter 1 micron (suitable for filtering beer) and the 1 Micron Carbon Filter (suitable for filtering water)Learn More
- Clear high pressure housing
- Purge valve to expel air pockets
- ½” BSP inlet and outlet
- Includes brass ball valve
- Brass threaded ports for durability
- Compatible with other 10” filter systems
Note: Does not include filter cartridge, links for the filter cartridges are below.
Price: AU$39.95These want kits are an easy way to use the stone. The wand kit includes the 60cm stainless steel 8mm OD wand and the aeration stone screws into the end using an MFL thread so it can easily be removed for autoclave or dip in acid soluton. The kit also includes a stainless clamp and 2 meters of vinyl tubing. -650mm total wand length Learn More
Price: AU$19.95• 10inch for compatibility • PE reinforced plastic shell to protect your filter from rupturing, or physical damage. • Washable (recommended wash with Sodium Percarbonate) • 1 micron absolute rated for most efficient filter action. Suitable filter for our 10inch Beer Filtering System Learn More
Price: AU$11.95Use this 2 micron stone with an oxygen source or an aeration pump to provide your yeast with oxygen pre-fermentation. CLEANING: This stone can be sanitised in boiling water and cleaned in a non-rinse sanitiser while running CO2 or air through the stone. If the pores in the stone get blocked from handling give a 10 second dip in hydrocloric acid before rinsing with water. Learn More
Price: AU$11.95This 0.5 micron diffusion stone can also be attached to the end of your “gas in” on your keg with 50cm of tubing to rapidly speed up carbonation. Ideal for use with our carbonation keg lids. CLEANING: This stone can be sanitised in boiling water and cleaned in a non-rinse sanitiser while running CO2 or air through the stone. If the pores in the stone get blocked from handling give a 10 second dip in hydrocloric acid before rinsing with water. Learn More
This aeration kit includes the air pump, sintered stainless stone, and the 0.2 micron autoclavable air filter.
This complete assembly will ensure that you get the best possible aeration in your wort which will lead to faster fermentation, better attenuation and healthier yeast in general. The included 0.2 micron air filter will also ensure that the air that you put into your wort is pure and free from any bacteria.
Simply dip the air stone into your fermenter and let it bubble in your fermenter for 15 - 30 minutes.
To clean and sterilise the air stone simply put in boiling water and store in clip lock bag.
- air pump
- sintered stainless stone
- 0.2 micron autoclavable air filter
- approx 1.5m hose
These kits come unassebled so you wll need to attach the line to the components. The barbs are quite large on the air filter so you will need to heat the tubing in some boiling water to get it on. Please see the video below for a demonstration how to get the hose onto larger barbs.
Price: AU$5.95These 0.2 Micron Air Filters will filter out microbes and bacteria. They can be used in many different ways. They can be used with our wort aerator pumps so you can aerate your wort, or can be used as an airlock in the top of your fermenter. They can also be used to filter air going back into a cask when dispensing real ale. This filter is not suitable for liquids and should be discarded if it gets wet. Learn More