Heating & Cooling Equipment
Price: AU$149.95These high pressure burners kick out a huge amount of heat and are suitable for beer batch sizes up to 150L. The power of these burners will ensure you are not waiting all day for your brew kettle to get up to temp. Using the supplied high pressure regulator you will be able to set the flame right down to a small simmer or right up to a roaring inferno giving you great range of control. Gas consumption between 0.5kg – 4.5kg per hour LPG depending on the burn rate. Features 1 - Sturdy welded steel frame (200kg rating) 2 - Powerful up to 210,000 BTU/hr (or 221MJ/hr with high a pressure regulator) 3 - Includes High Pressure Regulator Note: Does not include Keggle Learn More
Price: AU$19.95Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! The heating wrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution (59cm x 34cm). Using tape to adhere, the wrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from about 5-15 degrees Celsius. 30watts, 240v, Includes a 1.3m AU standard cord and plug. The heating mat can also be plugged into our MKII 10/30amp Temperature Controller for a more accurate temperature of your fermenter. Learn More
Out of stock
These stainless steel immersion chillers come included with the 35L RoboBrew but are also ideal for other smaller systems.
We also sell stainless compression fittings that can be used at attach other fittings to the ends of the chiller.
This is ideal for batch sizes up to 30litres.
Coiled part of the chiller: 24cm high x 19cm diameter
Total height of the chiller: 41cm
Tubing: 12.7mm, 304 Stainless
Price: AU$49.95These Font Fan Kits are the easiest way to chill the font of your Kegerator. Chilling your font will make sure every beer starts cold and helps reduce any foaming issues you might have caused by a warm font. The fan also increases air circulation in the fridge eliminating any warm spots and helps get your kegs in the fridge colder quicker. In many instances it will reduce the serving temperature of the beer by as much as 3 degrees Celsius. Kit includes: - Blower box - 12 volt power pack - Flexible tube Learn More
Price: AU$199.95The turbo boiler is fantastic if you want a one vessel system for making home brewed beer (using a Brew in the Bag technique) it is also a great way for boiling water or for making essential oils. The boiler comes standard with a 47mm hole to suit our Keggomax FM reflux still and to suit the "Still Spirits" stills (such as the T500). You can also can purchase separate lids with no hole, or lids with 60mm holeto suit the Pure Distilling stills. Features - Concealed element for easy cleaning - Boil dry protection - Large 30L capacity - Made from stainless steel - Handy Tap - Solid Lid with Silicon Seal Please note that if you intend on using this for distilling in Australia you can only use this for distillation of water, essential oils and other products that are not alcohol related. If you plan on distilling alcohol you will require a license in order to do this. Learn More
NOW with programmable temperature profile
NOW with automated distillation control feature
These new advanced temperature controllers look very similar to our old model temperature controllers but these now include even more features.
The temp controller now includes settings so you can:
1. Setup a temperature profile so you can program the temp controller to step up and down the temperature over time. For optimum fermentation conditions you can program this smart temperature controller to start fermenting at one temperature, increase the temperature after a number of days then crash chill. This is done without any intervention at all. Just set and forget. You can also use this to step up the temperature of your mash tun so it will automatically step the temperature up and down as you please. The options are endless.
2. Use this to automate you distillation column. If you have ever used a reflux still you will know how painful it is to sit there waiting and watching the still drip, drip, drip. Now this controller will look after the process for you. The controller can be used to control your reflux column so you can go and relax.
- High accuracy 0.1 degree C.
- Dual plugs so you can control heating and cooling devices at the same time
- 2 x 10amp sockets on rear; one for heating and one for cooling
- Works from -45C up to 120C
- Comes with fully waterproof probe so you can immerse the probe in water.
- Uses “50k ohm” Probe
- Manufactured in compliance with Australian Standards
Download the instruction manual here
NOTE: If you want to do a factory reset to the default settings please hold the up and down arrow down for 6 seconds.Learn More
The Icemaster G40 is a commercial grade icebank/glycol chiller that is extremely compact yet offers high performance for small to medium volume customers, so it is ideally suited to small bars, café’s and restaurants it can also be used as a glycol chiller for jacketed fermenters or bright beer tanks
The chiller includes impeller and pump ready to flood the font of your choice. Unlike other models the tank in this model is completely enclosed and insulated including the lid, this aids cooling performance and ultimately means you have less heat ingress and therefore a smaller power bill. The stainless steel input and output tubes are mounted to the side of the machine making them easier to install and also more suitable for bar installations where the height clearance is limited under the bar. This unit can be used as an icebank but due to the fact that it has a digital controller already installed it is also suitable for usage with glycol right out of the box. Glycol chilling will enable you to completely freeze up your flooded font when setting the font at sub‐zero temperatures on the digital controller
Pump: Impeller+Pump Combination
Product Lines: 4 Stainless Steel Product Lines (4 x 11meter Coils)
Product Line Size: 304 Stainless Steel Coils (8mm OD x 7mm ID)
Icebank: 22kg Icebank (when using water)
Tank Capacity: 40L Water Capacity
Cooling Capacity: 780watt Cooling Capacity.
Typical Product Cooling Capacity: 60Litres in the first hour, 35Litres each additional hour
Compressor Wattage: Italian Made Embraco (FFI 12BK) 260watt
Dimensions: 410mm x 410mm x 660mm
Download Specifications Sheet
Download Digital Temp Controller Instructions (older model)
Download Digital Temp Controller Menu Settings (newer model)Learn More
Price: AU$19.95The 30 watts will gently warm without creating a hot spot. Heating belts are preferable to heating pads for the reasons that they can simply be moved up or down the fermenter to increase or decrease the heat transfer to the brew. Heating belts are also preferable to heating pads because pads tend to heat up the yeast bed on the bottom of the fermenter which can produce some undesirable flavours in your beer. The heating belt can also be plugged into our MKII 10/30amp Temperature Controller for a more accurate temperature of your fermenter. Note: does not include fermenter Learn More
These heating elements are powerful and perfect to make use on your boiler. The element is made from 304 grade stainless steel.
This element is a weld free design meaning that you can easily install it by simply drilling a hole in your pot/keg/boiler of approximately 32mm and tightening a nut from the outside of the pot.
The diameter of the element at the widest point is 38mm so it is ideal if you need to pass the element through the neck of a keg to make a keg boiler.
This element also works extremely well with our RIMS Heat Stick Heat Exchanger Housing if you are planning on making a RIMS recirculating system.
- Powerful 2200 Watt
- thread:32mm, flange:40mm, length element only:290mm, diameter: 25mm
- Food grade high termperature silicone seal
Note: You will also need an IEC power cord sold separately
Warning: do not run these elements dry if you do you will damage the element and that damage will not be covered by the warranty.Learn More
DO YOU NEED TO KNOW HOW LONG IT WILL TAKE TO HEAT UP YOUR BATCH OF BEER? USE THE BOIL TIME CALCULATOR BELOW.
Price: AU$129.95The Chillout MKIII is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer. Dimensions: 315mm x 73mm x 73mm Learn More
These stainless steel immersion chillers are an easy way to chill your wort.
Simply push garden hose fittings over the ends of the coil and secure with hose clamp.
Best hose clamp to use is our stepless hose clamps 14-16mm depending on hose thickness.
We also sell stainless compression fittings that can be used at attach other fittings to the ends of the chiller.
This is ideal for batch sizes up to 45litres.
These are also ideal to maintain the temperature of your mash in your HERMs set up, just pump your wort from your mash tun through the Immersion Chiller whilst it is submerged in your HLT.
Coiled part of the chiller: 28cm high x 26cm diameter
Total height of the chiller: 65cm
Tubing: 12mm internal, 12.7mm external, 304 Stainless
Total coiled length: 14 meter
Price: AU$29.95With this Keg King bi-metal thermometer you can brew with confidence. The weldless fitting means it will mount to your mash tun, hot liquor tank, or kettle. The 132mm long probe means you will be able to get an accurate reading of the vessel temp in the middle. Features: - Calibration screw - 304 stainless steel housing and probe - ½” BSP thread - Temperature range -5C to 100C customised for brewing Includes a slimline nut and 2 x silicone seals plus a stainless washer NOTE: This unit is compatible with our Weldless Thermowell or our plastic push-in Bulkhead for Temperature Probe Learn More
Price: AU$29.95With this Keg King bi-metal thermometer you can brew with confidence. The weldless fitting means it will mount to your mash tun, hot liquor tank, or kettle. The 40mm long probe means you will be able to get an accurate reading of the vessel temp. Features: - Calibration screw - 304 stainless steel housing and probe - ½” BSP thread - Temperature range -5C to 100C customised for brewing Includes a slimline nut and 2 x silicone seals plus a stainless washer NOTE: This unit is compatible with our Weldless Thermowell or our plastic push-in Bulkhead for Temperature Probe Learn More
Price: AU$19.95Made of durable neoprene, these keg parkas will keep your beer cold for hours without the need for a bucket of ice. Perfect for parties or picnics, or anytime the keg is out of the fridge as it will help to maintain a cold temp in your keg for hours. Put a couple ice packs in between the keg and jacket and it will be even colder. Two sizes available: - 19 Litre 60cm high - 9 Litre 29cm high Note: They will fit any kegs that are between 20-24cm in diameter. Does not include Keg Learn More
Price: AU$24.95Made of durable neoprene, these keg parkas will keep your beer cold for hours without the need for a bucket of ice. Perfect for parties or picnics, or anytime the keg is out of the fridge as it will help to maintain a cold temp in your keg for hours. Put a couple ice packs in between the keg and jacket and it will be even colder. Two sizes available: - 19 Litre 60cm high - 9 Litre 29cm high Note: They will fit any kegs that are between 20-24cm in diameter. Does not include Keg Learn More
These heat stick housings make it very easy to build a RIMS recirculating mash system.
They have been made with TIG welded 50mm stainless pipe with 2 x ½” BSP female sockets at right angles in the top and bottom for the wort to flow in and out.
On each end there is a tri-clover end cap with a one with a 32m hole pre-drilled so it is ready to mount one of our 2200watt elements. The other end cap has a 20mm hole so it is ready to mount either a thermowell or bulkhead, this makes it very easy to then use our temperature controller and pump to build your own re-circulating RIMS system.
Includes: - 1 x RIMS tube TIG welded from 304 stainless - 2 x Silicone beaded seals - 2 x Tri-clover clamps - 1 x End plate with 32mm hole - 1 x End plate with 20.5mm hole
Note: does not include bulkhead, temp probe or element these are in the images to show how you put the full unit togetherLearn More