Keg Couplers (Commercial Style)

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Keg Coupler D-Type (Stainless Steel)

    Keg Coupler D-Type (Stainless Steel)

    Price: AU$69.95

    Also known as American Sankey coupler To fit CUB, Fosters, Carlton Draught and VB kegs Full Stainless Steel Includes: - Beer and Gas valve - Beer and Gas barbs Learn More
  2. Foam on Beer Detector (FOBs)

    Foam on Beer Detector (FOBs)

    Price: AU$110.00

    FOBs installed in a long draw draft beer system will reduce beer waste and increase beer profits. The use of FOB(s) can increase profits from draft beer sales when installed on a long draw beer dispensing system.

    When an FOB is installed on a long draw beer line and the keg empties, the beer flow is stopped immediately. The beer line remains full of beer, instead of filling with
    foam.

    Keeping the lines full of beer eliminates the need to refill the lines and purge the system with beer when tapping the next keg. This will significantly reduce beer waste. The actual reduction is based on the length of draw of the beer system being considered.

    These are best suited to systems used in pubs or breweries, they are not needed in short draw systems like kegerators.

    Learn More
  3. 5/8 Stainless Ball Valve (Female x Male)

    5/8 Stainless Ball Valve (Female x Male)

    Price: AU$19.95

    5/8th Inch Stainless Ball Valve (Female x Male) This ball valve can be attached to keg couplers or tap shanks which typically use 5/8" thread. May be used when filling kegs or to shut of the flow to a tap shank. Learn More
  4. Bottom Face Seal - D-type Coupler

    Bottom Face Seal - D-type Coupler

    Price: AU$3.95

    Replacement face seal to suit our D-type couplers. Learn More
  5. Bottom Face Seal - A-type Coupler

    Bottom Face Seal - A-type Coupler

    Price: AU$3.95

    Replacement face seal to suit our A-type couplers. Learn More
  6. 1/4 inch MFL for 5/8 Hex Nut Stainless

    1/4 inch MFL for 5/8 Hex Nut Stainless

    Price: AU$4.95

    Use this setup to easily change between commercial and home brew kegs without changing fittings or cutting beer lines. Connects to a standard commercial keg coupler with your existing hex nut. To switch between kegs, simply unscrew the 1/4-inch MFL connector from the quick disconnect and screw the tail piece and your existing hex nut into place with your standard keg coupler. Great for home brewers that also enjoy commercial keg beer. Learn More
  7. 5/8 Inch Duckbill Valve for Coupler

    5/8 Inch Duckbill Valve for Coupler

    Price: AU$2.45

    Silicone 'duckbill' valve used in the gas inlet of keg couplers. This valve prevents pressure from being released from a commercial keg though the gas inlet. This is a spare part for Keg King keg couplers and may be compatible with other brands. Learn More
  8. Keg Coupler S-Type (Full Stainless Steel)

    Keg Coupler S-Type (Full Stainless Steel)

    Price: AU$69.95

    Keg Coupler S-Type (Full Stainless Steel) Includes: - Beer and Gas valve - Beer and Gas barbs Learn More
  9. 12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    Price: AU$2.95

    12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank Suits tubing with 10.5mm - 13mm ID Learn More
  10. 10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    Price: AU$2.95

    10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank Suits tubing with 8mm - 10.5mm ID Learn More

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction