Gas Fittings

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Type 10 - 1/4inch thread nut & stem for MKII Regulator

    Type 10 - 1/4inch thread nut & stem for MKII Regulator

    Price: AU$29.95

    Attaches to our MKIII & MKII Regulator

    This nut and stem suit Oxygen, Argon, Helium tanks

    The normal MKIII Regulators that we sell come with a Type 30 thread which is suitable only for CO2 cylinders and nitrogen and CO2 mixed gas cylinders however if you would like to use this nut and stem you need to remove the existing type 30 Nut and Stem and replace with this one, we recommend using a ratchet gun or socket set.

    Note: Does not include regulator

    View specifications for Australian gas valves here.

    Learn More
  2. Brass 1/4inch MFL x 1/4 NPT (1/4 BSP)
  3. Type 30 - 1/4inch thread nut & stem for MKII Reg

    Type 30 - 1/4inch thread nut & stem for MKII Reg

    Price: AU$29.95

    Attaches to our MKIII Regulator

    For use with CO2, CO2/Nitrogen Mixed Gas

     

    View specifications for Australian gas valves here.

    Learn More
  4. Type 50 - 1/4inch thread nut & stem for MKII Reg

    Type 50 - 1/4inch thread nut & stem for MKII Reg

    Price: AU$29.95

    Attaches to our MKIII & MKII Regulators

    This nut and stem add on to our MKIII regulator suits Nitrogen tanks

    The normal MKIII Regulators that we sell come with a Type 30 thread which is suitable only for CO2 cylinders and nitrogen and CO2 mixed gas cylinders however if you would like to use this nut and stem you need to remove the existing type 30 Nut and Stem and replace with this one, we recommend using a ratchet gun or socket set.

    Note: Does not include regulator

    View specifications for Australian gas valves here.

    Learn More
  5. Add-On CO2 Regulator Adapter

    Add-On CO2 Regulator Adapter

    Price: AU$24.95

    Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expansion easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators. Note: does not include regulator or gas bottle Learn More
  6. Nylon Regulator Washer

    Nylon Regulator Washer

    Price: AU$0.50

    Nylon Regulator Washer to fit all of our dual gauge Keg King regulators Learn More
  7. 8mm Push in Needle Valve

    8mm Push in Needle Valve

    Price: AU$9.95

    We make all our push in fittings to suit 8mm (5/16) outside diameter (OD) beer and gas line. They are extremely easy to use and allow you to simply push your liquid or gas line straight into these fittings. No need to purchase clamps. To remove the fitting simply push in the black collet and the fitting comes undone. Note: not suitable for beer Learn More
  8. 1/4 Inch Ball Valve with Check Valve

    1/4 Inch Ball Valve with Check Valve

    Price: AU$7.95

    These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Should only be used with gas, not beer. The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing the 1/4 inch plug from the end of the manifold and inserting one of these 1/4 inch ball valves (see image to the left). Please note that due to the check valve mechanism there is about a 2 psi pressure drop over these ball valves. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg. Learn More
  9. Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Price: AU$19.95

    These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately (part#6097). This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items (as shown in pictures to the left). Learn More
  10. 8mm push in fitting - 1/4 inch thread

    8mm push in fitting - 1/4 inch thread

    Price: AU$2.95

    Out of stock

    Can be used instead of the barb as a push in fitting for the MKII regulators or as a push fitting on our manifolds Learn More

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction