Stainless BSP/NPT Fittings

Items 1 to 10 of 57 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP

    Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP

    Price: AU$15.95

    Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP with large 14mm Bore Learn More
  2. 12mm Stainless Compression Fitting to 1/2 inch BSP Male

    12mm Stainless Compression Fitting to 1/2 inch BSP Male

    Price: AU$4.95

    12.7 mm Stainless Compression Fitting to 1/2 inch BSP Male

    These compression fittings can be used with our immersion chiller so you can attach quick disconnects, camlocks or other fittings.

    Learn More
  3. Stainless Steel Ball Valve 1/2inch BSP x 13mm Barb

    Stainless Steel Ball Valve 1/2inch BSP x 13mm Barb

    Price: AU$24.95

    Stainless Steel Ball Valve with 1/2inch BSP thread on the inlet and a 13mm barb on the outlet.

    These can be used to fit a ball valve to a vessel, they come with a nut and silicone oring so can be used as a weldless fitting with a 20.5mm hole. Alternativley they can be threaded into any 1/2inch BSP female fitting. The outlet has a 13mm barb pointing down. The barb attaches with a 1/2inch thread so can be replaced with a quick disconnect or camlocks that we sell if you prefer. These are the same ball valves that come fitted to our 35L RoboBrew.

    Learn More
  4. 5/8 Stainless Ball Valve (Female x Male)

    5/8 Stainless Ball Valve (Female x Male)

    Price: AU$19.95

    5/8th Inch Stainless Ball Valve (Female x Male) This ball valve can be attached to keg couplers or tap shanks which typically use 5/8" thread. May be used when filling kegs or to shut of the flow to a tap shank. Learn More
  5. 1/2 BSP Stainless Ball Valve Port Assembly (to port pot or keg)

    1/2 BSP Stainless Ball Valve Port Assembly (to port pot or keg)

    Price: AU$24.95

    This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening. The 1/2” BSP Male x 13mm Barb (part no. 5700 shown in the picture to the left) can be fitted to the ball valve so you can attach any 11-14mm ID type hose (such as our silicon hose part no. 5496) On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm meaning you can attach an elbow to the inside of the vessel so it draws from the bottom (shown in the picture to the left) Note: does not include the elbow or 13mm barb Learn More
  6. Elbow Bend 1/4 BSP Male x 1/4 BSP Female

    Elbow Bend 1/4 BSP Male x 1/4 BSP Female

    Price: AU$2.45

    Elbow Bend 1/4 BSP Male x 1/4 BSP Female Learn More
  7. Elbow Bend 1/2 BSP Male x 1/2 BSP Female

    Elbow Bend 1/2 BSP Male x 1/2 BSP Female

    Price: AU$3.70

    Stainless Steel Elbow Bend 1/2 BSP Male x 1/2 BSP Female Learn More
  8. Internal Threaded Pipe Socket 1/8 BSP

    Internal Threaded Pipe Socket 1/8 BSP

    Price: AU$2.50

    Internal Threaded Pipe Socket 1/8 BSP Learn More
  9. Internal Threaded Pipe Socket 1/4 BSP

    Internal Threaded Pipe Socket 1/4 BSP

    Price: AU$2.50

    Internal Threaded Pipe Socket 1/4 BSP Learn More
  10. Tapered External Threaded Pipe Nipple 1/2 BSP

    Tapered External Threaded Pipe Nipple 1/2 BSP

    Price: AU$3.95

    Tapered External Threaded Pipe Nipple 1/2 BSP Learn More

Items 1 to 10 of 57 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction