Other Stainless Steel Fittings

Items 1 to 30 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Solid Stainless 100mm Weldless Thermowell

    Solid Stainless 100mm Weldless Thermowell

    Price: AU$34.95

    This weldless thermowell is made from solid 304 stainless. It has a straight ½” BSP thread which is 40mm Long. It includes a silicone o-ring, a stainless steel slimline nut and also the extra long nut for mounting directly to our 3 inch dial thermometers. This thermowell can also be used in conjunction with our digital temperature controllers. The probe will slide straight into the thermowell. Note: Thermometer not included Learn More
  2. Gas Ball Lock Post with 5/8inch Thread

    Gas Ball Lock Post with 5/8inch Thread

    Price: AU$14.95

    This part is extremely handy so you can connect your ball lock disconnects to your keg coupler. It has on one side a 5/8 female thread and on the other a gas ball lock disconnect. It is made completely from stainless steel. Note: this does not include the coupler Learn More
  3. Liquid Ball Lock Post with 5/8inch Thread

    Liquid Ball Lock Post with 5/8inch Thread

    Price: AU$14.95

    This part is extremely handy so you can connect your ball lock disconnects to your keg coupler. It has on one side a 5/8 female thread and on the other a liquid ball lock disconnect. It is made completely from stainless steel. Note; This does not include the coupler Learn More
  4. Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP

    Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP

    Price: AU$15.95

    Stainless Steel Ball Valve 1/2 BSP x 1/2 BSP with large 14mm Bore Learn More
  5. 1/2 BSP Stainless Ball Valve Port Assembly (to port pot or keg)

    1/2 BSP Stainless Ball Valve Port Assembly (to port pot or keg)

    Price: AU$24.95

    This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening. The 1/2” BSP Male x 13mm Barb (part no. 5700 shown in the picture to the left) can be fitted to the ball valve so you can attach any 11-14mm ID type hose (such as our silicon hose part no. 5496) On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm meaning you can attach an elbow to the inside of the vessel so it draws from the bottom (shown in the picture to the left) Note: does not include the elbow or 13mm barb Learn More
  6. Liquid Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Liquid Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Price: AU$19.95

    These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately (part#6097). This would enable you to make a keg out of any pressure vessel if you wanted to. Note: the liquid post is the one with no score marks Learn More
  7. Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    Price: AU$19.95

    These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately (part#6097). This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items (as shown in pictures to the left). Learn More
  8. 8mm Stainless Compression Fitting to 6mm Barb

    8mm Stainless Compression Fitting to 6mm Barb

    Price: AU$8.80

    8mm Stainless Compression Fitting suitable for 8mm OD pipe with a 6mm barb Learn More
  9. Stainless Tee - 6mm Barb

    Stainless Tee - 6mm Barb

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel.. The stainless ‘tee’ piece is made to fit 4mm – 6mm ID beer line. Learn More
  10. Stainless Splicer - 6mm x 13mm

    Stainless Splicer - 6mm x 13mm

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless splicer is perfect for attaching 4mm-6mm ID line to 10mm-13mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  11. Stainless Joiner - 6mm Barb

    Stainless Joiner - 6mm Barb

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless joiner is perfect for joining 4mm-6mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  12. Stainless Joiner - 13mm Barb

    Stainless Joiner - 13mm Barb

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless joiner is perfect for joining 10mm - 13mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  13. Stainless Tee 13mm Barb

    Stainless Tee 13mm Barb

    Price: AU$3.95

    These stainless fittings are machined from 304 stainless steel. The stainless Tee is perfect for 10mm - 13mm ID line. We sell a large range of joiners and splicers as linked below. Learn More
  14. 12mm Stainless Compression Fitting to 1/2 inch BSP Male

    12mm Stainless Compression Fitting to 1/2 inch BSP Male

    Price: AU$4.95

    12.7 mm Stainless Compression Fitting to 1/2 inch BSP Male

    These compression fittings can be used with our immersion chiller so you can attach quick disconnects, camlocks or other fittings.

    Learn More
  15. 8mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    8mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    Price: AU$2.95

    8mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank Suits tubing with 6mm - 8mm ID Learn More
  16. 10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    Price: AU$2.95

    10mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank Suits tubing with 8mm - 10.5mm ID Learn More
  17. 12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

    Price: AU$2.95

    12.5mm Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank Suits tubing with 10.5mm - 13mm ID Learn More
  18. 1.5 Inch Tri Clover 3 Piece Ball Valve

    1.5 Inch Tri Clover 3 Piece Ball Valve

    Price: AU$99.95

    1.5 Inch Tri Clover 3 Piece Ball Valve Learn More
  19. 1.5 Inch Tri Clover Pressure  Vacuum Relief Valve

    1.5 Inch Tri Clover Pressure Vacuum Relief Valve

    Price: AU$99.00

    1.5 inch stainless steel sanitary pressure / vacuum relief valve is a self activating device designed to protect your tank. This dual acting valve will not only releases relief pressure if the tank exceeds 1.5 bar but it will also will also protect than tank from imploding in the unlikely instance that the tank is subject to vacuum. Working pressure: 1.5 bar / 22 psi Learn More
  20. 1.5 Inch Tri Clover Sight Glass

    1.5 Inch Tri Clover Sight Glass

    Price: AU$156.20

    1.5" Tri Clover Compatible Inline Sight Glass. Made of 304 stainless steel. Easily taken apart for cleaning. One popular application for the 1.5" Tri Clover Compatible sight glass is to attach a cap to one end and then clamp it to the dump valve on a conical fermenter. Do this after dumping all your trub, then open the the dump valve and allow your yeast to settle into the tube. Makes a great yeast collection cup. Note: does not include the silicone seals Learn More
  21. Stainless Steel Ball Valve 1/2inch BSP x 13mm Barb

    Stainless Steel Ball Valve 1/2inch BSP x 13mm Barb

    Price: AU$24.95

    Stainless Steel Ball Valve with 1/2inch BSP thread on the inlet and a 13mm barb on the outlet.

    These can be used to fit a ball valve to a vessel, they come with a nut and silicone oring so can be used as a weldless fitting with a 20.5mm hole. Alternativley they can be threaded into any 1/2inch BSP female fitting. The outlet has a 13mm barb pointing down. The barb attaches with a 1/2inch thread so can be replaced with a quick disconnect or camlocks that we sell if you prefer. These are the same ball valves that come fitted to our 35L RoboBrew.

    Learn More
  22. 14mm Stainless Compression Fitting to 1/2 inch BSP Male

    14mm Stainless Compression Fitting to 1/2 inch BSP Male

    Price: AU$4.95

    14.0mm Stainless Compression Fitting to 1/2 inch BSP Male

    These compression fittings can be used to attach 14.0mm outside diameter pipe to quick disconnects, camlocks or other fittings.

    Learn More
  23. Stainless Joiner - 8mm Barb

    Stainless Joiner - 8mm Barb

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless joiner is perfect for joining 7mm-9mm ID line.

    We sell a large range or splicers and joiners as linked below.

    Learn More
  24. Stainless Joiner - 10mm Barb

    Stainless Joiner - 10mm Barb

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless joiner is perfect for joining 9mm-11mm ID line. We sell a large range or splicers and joiners as linked below.

    Learn More
  25. Stainless Splicer - 6mm x 8mm

    Stainless Splicer - 6mm x 8mm

    Price: AU$2.95

    These stainless fittings are machined from 304 stainless steel. The stainless splicer is perfect for attaching 4mm-6mm ID line to 7mm-9mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  26. Stainless Splicer - 8mm x 10mm

    Stainless Splicer - 8mm x 10mm

    Price: AU$2.95

    Out of stock

    These stainless fittings are machined from 304 stainless steel. The stainless splicer is perfect for attaching 7mm-9mm ID line to 9mm-11mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  27. Stainless Splicer - 10mm x 13mm

    Stainless Splicer - 10mm x 13mm

    Price: AU$2.95

    Out of stock

    These stainless fittings are machined from 304 stainless steel. The stainless splicer is perfect for attaching 9mm-11mm ID line to 12mm-14mm ID line. We sell a large range or splicers and joiners as linked below. Learn More
  28. 5/8 to 19/32 Cornelius Keg to KingLok Adaptor

    5/8 to 19/32 Cornelius Keg to KingLok Adaptor

    Price: AU$9.95

    These handy stainless fittings screw onto the 19L and 9.5L ball lock kegs or any other Cornelius kegs and convert the 19/32" thread to 5/8". The most common reason to do this is to convert the post on the keg from ball lock posts to KingLok (or SnapLok) fittings.

    Once you attach this adaptor you can then screw in the KingLok part #8350 onto the keg and use the keg as a wash out keg or simply use the keg with high flow rates that KingLok/SnapLok fittings allow.

    Learn More
  29. 1/4 inch MFL for 5/8 Hex Nut Stainless

    1/4 inch MFL for 5/8 Hex Nut Stainless

    Price: AU$4.95

    Out of stock

    Use this setup to easily change between commercial and home brew kegs without changing fittings or cutting beer lines. Connects to a standard commercial keg coupler with your existing hex nut. To switch between kegs, simply unscrew the 1/4-inch MFL connector from the quick disconnect and screw the tail piece and your existing hex nut into place with your standard keg coupler. Great for home brewers that also enjoy commercial keg beer. Learn More
  30. Teflon Tape (three pack)

    Teflon Tape (three pack)

    Price: AU$1.95

    Teflon PTFE tape is a great way to ensure that you get a water/gas tight seal on threaded joints. 3x 8m Rolls Learn More

Items 1 to 30 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction